Thermocouple Compensating Wire: Why You Cannot Use Copper

We get calls where the controller reads 50 C low or high. Nine times out of ten, someone used regular copper wire to extend the thermocouple.

Why it matters

A thermocouple works on the Seebeck effect - two dissimilar metals produce a voltage proportional to temperature. If you splice in copper, you create a new junction at the splice. The controller reads the sum of both junctions.

Extension vs compensating

K type uses KX or KCA. J type uses JX. Do not mix them.

Color codes

A food plant in Guangzhou had an oven reading 180 C when actual was 220 C. They were using thermostat wire instead of KX. Swapped to KX shielded cable, reading matched.

Need thermocouples with matching wire?

Tell us type, length and where you mount it. We supply the correct lead.

Send Your Specs
Get a Quote