Single Phase vs Three Phase Heater: Which Power Do You Have?

When we quote a heater, the first question is always: single phase or three phase? Get this wrong and the heater will not heat, or it burns out instantly.

Single phase (220V)

Two wires: live and neutral. Common in homes, offices and small shops. A 10 kW heater at 220V draws 45 amps. That needs 6 mm2 cable and a 50A breaker.

Three phase (380V)

Three live wires (L1, L2, L3) plus ground. Common in factories. Power between any two phases is 380V, between one phase and neutral is 220V. A 10 kW three phase heater draws 15 amps per phase. That needs 2.5 mm2 cable and a 20A breaker per phase.

Three phase is more efficient. Same 10 kW heater uses thinner wire and smaller breakers. That is why factories run three phase.

How to tell what you have

Wiring a three phase heater

Heaters are resistive loads. We wire them in star (Y) or delta. Star: each element sees 220V. Delta: each element sees 380V. The factory wires it for you - do not change it on site.

Need a heater wired for your power supply?

Tell us your voltage and phase. We build it ready to connect.

Send Your Specs
Get a Quote