PTC stands for Positive Temperature Coefficient. The ceramic element has a Curie temperature - above that, resistance shoots up and power drops by itself. No thermostat needed.
How it works
Below Curie temp, the ceramic conducts, power is high, it heats fast. Above Curie, resistance jumps 10 to 100 times, power self-limits. Typical Curie points are 60, 80, 120, 160 and 220 C.
Where PTC wins
- Railway and subway - no overheat risk
- Battery packs - safe, no red glow
- Food equipment - cannot burn the product
- Room heaters - no thermostat to fail
Where PTC stalls
PTC power depends on how well you cool it. If the heat cannot get out, the element hits Curie at low power output and never reaches target temperature.
A customer in Qingdao built a 3 m long curing oven with PTC. It would not go above 80 C even though elements were rated 160 C. We found the fins were not bonded to the aluminum channel - air gap. Rebonded with thermal epoxy, oven hit 150 C in 20 minutes.
Sizing rules
- PTC wattage drops 30 to 50% at working temp - size for the hot number, not cold
- Need forced air or conductive mounting - still air kills output
- Voltage matters - PTC is resistive, 220V unit on 200V loses 20% power
Need PTC heaters for your application?
Tell us target temp, airflow and voltage. We will pick the right Curie point.
Send Your Specs