The first question on a tank heating job is how many kW the heater needs. You can work out a sound estimate from the liquid mass, its specific heat, the temperature rise and the time you allow to get there.
Basic heating formula
The energy to warm a mass of liquid comes from its specific heat. In kilowatts:
kW = (mass in kg × specific heat kJ/kg·°C × temperature rise °C) ÷ (3600 × heating time in hours × efficiency)
- Mass: for water, one liter is about one kilogram; oil mass comes from volume times density
- Specific heat: water about 4.18 kJ/kg·°C; oils are lower, roughly 1.8 to 2.1 depending on grade
- Temperature rise: target temperature minus starting temperature
- Efficiency: assume 0.8 to 0.9 to allow for heat that escapes the tank
Worked example
1000 liters of water, starting at 20 C, target 80 C, wanted in two hours, efficiency 0.85.
Kilograms: 1000. Rise: 60 C.
kW = 1000 × 4.18 × 60 ÷ (3600 × 2 × 0.85) ≈ 41 kW.
What the formula does not cover
The calculation above only covers warming the liquid. Add to it:
- Heat lost through tank walls, lid and pipes during the heating period
- Standing heat loss if the tank holds temperature over hours or days
- A margin for colder-than-expected feed liquid or a short target time
- Any cold metal the heater also brings up to temperature at startup
For this reason most designers add 20 to 30 percent over the bare formula result, then split the total across elements that keep a safe sheath watt density for the fluid.
Oil versus water
Do not reuse the water numbers for oil. Oil has lower specific heat but higher viscosity and slower heat transfer, so even where the kW looks similar, the element design and surface load differ. Tell us the fluid and its density if you want a checked figure.
Run the formula for the basic kW, then add margin for wall loss and startup. Never size a heater on kW alone: the sheath load and circulation have to suit the liquid.
Want a power calculation checked for your tank?
Send us volume, fluid, start and target temperature, and the heating time. We will estimate the kW and lay out the bundle to match.
Send Tank Details