Old factories use fuses. New panels use breakers. Which is better for protecting electric heaters?
Fuses
A thin wire that melts when overcurrent flows. Blows in milliseconds. Cheap (5 RMB). But once blown, you have to replace it. No resettable.
Best for: short circuit protection, semiconductor protection (SSR, SCR), where fast blow matters.
Circuit breakers
A mechanical switch that trips on overcurrent. Resettable by flipping. Slower to trip than a fuse (10 to 100 ms). Costs 50 to 200 RMB.
Best for: everyday use, where you do not want to keep spare fuses on the shelf.
What we recommend
- Main heater circuit: Type C circuit breaker for convenience
- Before each SSR or SCR: add a fast blow fuse. SSRs die in microseconds on short circuit - a breaker is too slow.
A customer had SSRs failing every month. The breaker was too slow to trip on a shorted SSR. We added a 15A fast blow fuse before each SSR. SSR failures dropped 90%.
Need a protected heater panel?
We build panels with breaker + fuse + SSR. Ready to wire.
Send Your Specs