On an extrusion line, the head and die body hold the plastic at a steady melt temperature. A cast copper heater is cast around that body shape: the heating elements are embedded in a copper mass that contacts the head over a broad, even surface.
Why copper for the head
Copper conducts heat well, so the warmth from the embedded elements spreads through the casting instead of staying concentrated at the element location. That matters around a die where one hot or cold spot changes the extruded profile. Cast copper also holds a higher working temperature than cast aluminum, which suits hotter engineering plastics.
- Broad contact face with the head body, few air gaps
- Heat spreads through the copper casting for even die temperature
- Higher temperature ceiling than aluminum castings
- Built-in pocket for a thermocouple or probe to read body temperature
How the casting is made
A tubular heating element is laid to match the head outline, then cast in copper around a core that follows the part. The finished heater splits into halves that clamp around the head, with a terminal box or lead exits on the outside. Internal channels can carry a probe or cooling line where the design needs it.
Where they appear on the machine
- Extrusion adapter and neck between barrel and die
- Die body and screen changer zone
- Local heating on injection machine nozzles and heavy mold plates
Cast copper versus cast aluminum
Aluminum is lighter and lower cost for moderate temperatures on standard barrels. Copper is chosen where temperature is higher or the die needs a more uniform thermal mass. The choice follows the plastic, the head shape and the setpoint rather than a fixed rule.
For a head that must stay even at higher melt temperature, cast copper wraps the body and spreads heat through the casting. For moderate, lighter-duty barrels, cast aluminum usually fits the cost better.
Need a cast heater for your extrusion head?
Send the head drawing, working temperature, wattage and voltage. We will cast the element to the body shape with a probe pocket if needed.
Send the Drawing