Cast Aluminum Heater Problems We See Every Week

Cast aluminum heaters wrap around extruder barrels and die heads. They are durable - until they crack. When a cast heater fails, it is usually one of four things.

1. Air gap between heater and barrel

If the cast does not fit tight, heat cannot transfer. The heater runs hot internally and cracks. Torque the clamp bolts evenly to spec.

2. Watt density too high

Cast aluminum tops out around 350 C. Cast bronze goes to 500 C. If you run aluminum at 400 C, it softens and deforms. Use bronze for higher temps.

3. Internal element burnout

The resistance wire is embedded in the casting. If it runs dry (no barrel attached), it overheats and burns out. Never power a cast heater without it mounted.

4. Thermal cycling fatigue

Constant heat up and cool down causes metal fatigue. Over years, cracks form. We use high-purity casting to minimize this.

Need replacement cast heaters?

Send us the die or barrel drawing. We will cast to your exact profile.

Get Cast Heaters
Get a Quote